PPTC fuse

PPTC fuse Product Dimensions
Size 1608mm/0603mils

Part number	A	B	C	D	E
	Max.	Max.	Max.	Min.	Min.
LP-TSM004	1.80	1.00	0.75	0.15	0.10
LP-TSM005	1.80	1.00	0.75	0.15	0.10
LP-TSM010	1.80	1.00	0.75	0.15	0.10
LP-TSM012	1.80	1.00	0.75	0.15	0.10
LP-TSM016	1.80	1.00	0.75	0.15	0.10
LP-TSM020	1.80	1.00	0.80	0.15	0.10
LP-TSM025	1.80	1.00	0.80	0.15	0.10
LP-TSML035	1.80	1.00	0.75	0.15	0.10
LP-TSML050	1.80	1.00	0.75	0.15	0.10
LP-TSML075	1.80	1.00	1.00	0.15	0.10
LP-TSML100	1.80	1.00	1.00	0.15	0.10

Thermal Derating Chart-IH(A)
Size 1608mm/0603mils

Part number	Maximum ambient operating temperatures(℃)
	-40	-20	0	20	25	40	50	60	70	85
LP-TSM004	0.064	0.056	0.048	0.044	0.04	0.032	0.028	0.024	0.02	0.016
LP-TSM005	0.08	0.07	0.06	0.055	0.05	0.04	0.035	0.03	0.025	0.02
LP-TSM010	0.14	0.13	0.12	0.11	0.10	0.08	0.07	0.06	0.05	0.03
LP-TSM012	0.16	0.14	0.13	0.13	0.12	0.10	0.09	0.08	0.07	0.05
LP-TSM016	0.21	0.19	0.18	0.17	0.16	0.13	0.12	0.10	0.09	0.06
LP-TSM020	0.27	0.25	0.23	0.21	0.20	0.17	0.14	0.12	0.10	0.07
LP-TSM025	0.32	0.29	0.27	0.26	0.25	0.21	0.18	0.16	0.14	0.10
LP-TSML035	0.47	0.41	0.38	0.36	0.35	0.29	0.26	0.24	0.20	0.14
LP-TSML050	0.67	0.58	0.54	0.52	0..50	0.51	0.37	0.34	0.28	0.20
LP-TSML075	1.00	0.87	0.81	0.77	0.75	0.62	0.56	0.51	0.43	0.30
LP-TSML100	1.34	1.17	1.08	1.02	1.00	0.82	0.74	0.68	0.57	0.40

Typical Time-to-Trip Charts at 25℃

Electrical Characteristics at 25℃
Size 2012mm/0805mils

Part number	IH	IT	Vmax	Imax	Max.Time-to-trip		Pdtyp	Rmin	R1max
	(A)	(A)	(V)	(A)	(A)	(S)	(W)	(Ω)	(Ω)
LP-TSM004	0.04	0.12	15	20	0.20	1.00	0.5	4.000	40.000
LP-TSM005	0.05	0.15	15	40	0.25	1.00	0.5	2.000	40.000
LP-TSM010	0.10	0.25	15	40	0.50	1.00	0.5	0.900	6.000
LP-TSM012	0.12	0.30	12	40	0.60	0.80	0.5	0.800	5.500
LP-TSM016	0.16	0.40	9	40	0.80	1.00	0.5	0.700	4.200
LP-TSM020	0.20	0.50	9	40	1.00	0.60	0.5	0.550	3.500
LP-TSM025	0.25	0.55	9	40	8.00	0.08	0.5	0.500	3.000
LP-TSML035	0.35	0.75	6	40	8.00	0.10	0.5	0.200	1.000
LP-TSML050	0.50	1.00	6	50	8.00	0.60	0.5	0.120	0.400
LP-TSML075	0.75	1.50	6	50	8.00	1.00	0.5	0.080	0.250
LP-TSML100	1.00	1.80	6	50	8.00	2.00	0.5	0.050	0.220

IH=Hold current: maximum current at which the device will not trip at 25℃ still air.
IT=Trip current: minimum current at which the device will always trip at 25℃ still air.
Vmax=Maximum voltage device can withstand without damage at rated current.
Imax=Maximum fault current device can withstand without damage at rated voltage.
Ttrip=Maximum time to trip at assigned current.
Pdtyp=Typical power dissipation: typical amount of power dissipated by the device when in state air environment.
Rmin=Minimum device resistance at 25℃ prior to tripping.
R1max=Maximum device resistance measured in the nontripped state 1 hour post reflow.
Part Numbering System

 Test Procedures And Requirements

Test	Test Conditions	Accept/Reject Criteria
Resistance	In still air @ 25℃	Rmin≤R≤Rmax
Time to Trip	Specified current, Vmax, 25℃	T≤maximum Time to Trip
Hold Current	30min, at IH	No trip
Trip Cycle Life	Vmax, Imax, 100cycles	No arcing or burning
Trip Endurance	Vmax, 24hours	No arcing or burning

    Packaging and Marking Information
Size 2012mm/0805mils

Part number	Tape& Reel Quantity	Tape spc code	Part Marking	Recommended Pad Layout Figures [mm(In.)]						Agency Recognition
				Dimension A(Nom.)		Dimension B(Nom.)		Dimension C(Nom.)
LP-TSM004	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSM005	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSM010	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSM012	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	Pending
LP-TSM016	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSM020	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSM025	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	Pending
LP-TSML035	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSML050	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSML075	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA
LP-TSML100	5000	0603A	/	0.60	(0.021)	1.10	(0.041)	1.00	(0.039)	UL,CSA

* Recommended reflow methods: IR, Vapor phase oven, hot air oven, wave solder.
* Devices can be cleaned using standard industry methods and solvents.
Notes:
If reflow temperatures exceed the recommended profile,
devices may not meet the performance requirements.
Tape Specification And Reel Dimensions

Tape spc code	W	P0	P1	P2	A	bB B	D	F	E	T	K
0603(A)	8.00±0.10	4.00±0.10	4.00±0.10	2.00±0.10	1.10±0.10	1.90±0.10	1.55±0.05	3.50±0.10	1.75±0.10	0.22±0.05	1.10±0.10

 Reel Dimensions

Tape spc code	A	N	W1	W2
0603(A)	180+0/-1.5	60+1/-0	9.0+1/-0	13.0+1/-0

Storage 

The maximum ambient temperature shall not exceed 40℃. 
Storage temperatures higher than 40℃ could result in the deformation of packaging materials. 
The maximum relative humidity recommended for storage is 70%. 
High humidity with high temperature can accelerate the oxidation of the solder plating on the termination and reduce the solderability of the components. 
Sealed plastic bags with desiccant shall be used to reduce the oxidation of the termination and shall only be opened prior to use. 
The products shall not be stored in areas where harmful gases containing sulfur or chlorine are present.

Warning:

PPTC devices are intended for protection against occasional over-current or over-temperature fault conditions, and should not be used when repeated fault conditions are anticipated. Operation beyond maximum ratings or improper use may result in device damage and possible electrical arcing and flame.

Notes:

The specification is intended to present application, product and technical data to assist the user in selecting PPTC circuit prBBBBB