Resettable Fuse Product Dimensions
Size 7555mm/2920 mils
Part number | Dimension | |||||
A | B | C | D | E | Figures for | |
Max. | Max. | Max. | Min. | Min. | Dimension | |
LP-SM030 | 7.98 | 3.18 | 5.44 | 0.50 | S3 | |
LP-SM050 | 7.98 | 3.18 | 5.44 | 0.50 | S3 | |
LP-SM075 | 7.98 | 3.18 | 5.44 | 0.50 | S3 | |
LP-SM110 | 7.98 | 3.18 | 5.44 | 0.50 | S3 | |
LP-SM125 | 7.98 | 3.18 | 5.44 | 0.50 | S3 | |
LP-SM260 | 7.98 | 3.18 | 5.44 | 0.50 | S3 | |
LP-SM300 | 7.98 | 3.18 | 5.44 | 0.50 | S3 | |
LP-SM030C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM050C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM075C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM110C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM125C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM130C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM150C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM185C | 7.98 | 5.44 | 1.25 | 0.30 | 0.30 | S2 |
LP-SM200C | 7.98 | 5.44 | 1.50 | 0.30 | 0.30 | S2 |
LP-SM250C | 7.98 | 5.44 | 1.50 | 0.30 | 0.30 | S2 |
LP-SM260C | 7.98 | 5.44 | 1.50 | 0.30 | 0.30 | S2 |
LP-SM300C | 7.98 | 5.44 | 1.50 | 0.30 | 0.30 | S2 |
LP-SM300C/24 | 7.98 | 5.44 | 1.50 | 0.30 | 0.30 | S2 |
LP-SM400C | 7.98 | 5.44 | 2.00 | 0.30 | 0.30 | S2 |
Size 8763mm/3425 mils
Thermal Derating Chart-IH(A)
Size 7555mm/2920 mils
Part number | Maximum Ambient Temperature | |||||||||
-40℃ | -20℃ | 0℃ | 20℃ | 25℃ | 40℃ | 50℃ | 60℃ | 70℃ | 85℃ | |
LP-SM030 | 0.48 | 0.41 | 0.35 | 0.32 | 0.30 | 0.25 | 0.23 | 0.19 | 0.15 | 0.10 |
LP-SM050 | 0.80 | 0.71 | 0.59 | 0.52 | 0.50 | 0.44 | 0.38 | 0.32 | 0.26 | 0.19 |
LP-SM075 | 1.21 | 1.05 | 0.89 | 0.78 | 0.75 | 0.64 | 0.56 | 0.49 | 0.41 | 0.28 |
LP-SM110 | 1.75 | 1.54 | 1.32 | 1.15 | 1.10 | 0.96 | 0.83 | 0.73 | 0.61 | 0.42 |
LP-SM125 | 1.99 | 1.75 | 1.51 | 1.30 | 1.25 | 1.07 | 0.94 | 0.83 | 0.69 | 0.46 |
LP-SM260 | 4.12 | 3.62 | 3.18 | 2.64 | 2.60 | 2.23 | 1.91 | 1.75 | 1.45 | 1.02 |
LP-SM300 | 4.74 | 4.21 | 3.63 | 3.05 | 3.00 | 2.59 | 2.25 | 2.02 | 1.65 | 1.18 |
LP-SM030C | 0.47 | 0.43 | 0.38 | 0.31 | 0.30 | 0.24 | 0.21 | 0.18 | 0.16 | 0.11 |
LP-SM050C | 0.81 | 0.73 | 0.63 | 0.52 | 0.50 | 0.44 | 0.36 | 0.33 | 0.26 | 0.21 |
LP-SM075C | 1.21 | 1.08 | 0.93 | 0.79 | 0.75 | 0.64 | 0.54 | 0.49 | 0.41 | 0.30 |
LP-SM110C | 1.76 | 1.57 | 1.36 | 1.15 | 1.10 | 0.96 | 0.80 | 0.72 | 0.61 | 0.43 |
LP-SM125C | 2.01 | 1.78 | 1.54 | 1.30 | 1.25 | 1.09 | 0.91 | 0.82 | 0.69 | 0.49 |
LP-SM130C | 2.06 | 1.81 | 1.59 | 1.35 | 1.30 | 1.13 | 0.93 | 0.86 | 0.72 | 0.51 |
LP-SM150C | 2.40 | 2.09 | 1.81 | 1.52 | 1.50 | 1.33 | 1.06 | 1.01 | 0.83 | 0.59 |
LP-SM185C | 2.95 | 2.58 | 2.28 | 1.87 | 1.85 | 1.64 | 1.34 | 1.24 | 1.03 | 0.72 |
LP-SM200C | 3.18 | 2.80 | 2.45 | 2.03 | 2.00 | 1.76 | 1.45 | 1.32 | 1.11 | 0.79 |
LP-SM250C | 3.98 | 3.51 | 3.06 | 2.53 | 2.50 | 2.19 | 1.82 | 1.68 | 1.40 | 0.95 |
LP-SM260C | 4.15 | 3.65 | 3.18 | 2.64 | 2.60 | 2.24 | 1.91 | 1.77 | 1.46 | 1.01 |
LP-SM300C | 4.76 | 4.21 | 3.66 | 3.05 | 3.00 | 2.61 | 2.21 | 2.05 | 1.69 | 1.17 |
LP-SM300C/24 | 4.76 | 4.21 | 3.66 | 3.05 | 3.00 | 2.61 | 2.21 | 2.05 | 1.69 | 1.17 |
LP-SM400C | 6.35 | 5.63 | 4.86 | 4.05 | 4.00 | 3.46 | 2.95 | 2.72 | 2.24 | 1.53 |
Size 8763mm/3425mils
Part number | Maximum Ambient Temperature | |||||||||
-40℃ | -20℃ | 0℃ | 20℃ | 25℃ | 40℃ | 50℃ | 60℃ | 70℃ | 85℃ | |
LP-SM130 | 2.05 | 1.84 | 1.59 | 1.32 | 1.30 | 1.12 | 0.94 | 0.87 | 0.73 | 0.49 |
LP-SM150 | 2.42 | 2.10 | 1.81 | 1.52 | 1.50 | 1.30 | 1.11 | 1.01 | 0.85 | 0.57 |
LP-SM185 | 2.96 | 2.62 | 2.26 | 1.88 | 1.85 | 1.59 | 1.36 | 1.26 | 1.03 | 0.69 |
LP-SM200 | 3.19 | 2.84 | 2.45 | 2.06 | 2.00 | 1.75 | 1.46 | 1.36 | 1.12 | 0.76 |
LP-SM250 | 3.99 | 3.54 | 3.06 | 2.56 | 2.50 | 2.18 | 1.85 | 1.71 | 1.41 | 0.94 |
Typical Time-to-Trip Charts at 25℃
Electrical Characteristics at 25℃
Size 7555mm/2920 mils
Part number | IH | IT | Vmax | Imax | Max. Time-to-trip | Pd typ | Rmin | R1max | Figures for | |
(A) | (A) | (V) | (A) | (A) | (S) | (W) | (Ω) | (Ω) | Dimension | |
LP-SM030 | 0.30 | 0.60 | 60 | 10 | 1.5 | 3.00 | 1.9 | 0.700 | 4.800 | S3 |
LP-SM050 | 0.50 | 1.00 | 60 | 10 | 2.5 | 4.00 | 1.9 | 0.350 | 1.400 | S3 |
LP-SM075 | 0.75 | 1.50 | 60 | 40 | 8.0 | 0.30 | 1.9 | 0.290 | 1.000 | S3 |
LP-SM110 | 1.10 | 2.20 | 33 | 40 | 8.0 | 0.50 | 1.9 | 0.100 | 0.480 | S3 |
LP-SM125 | 1.25 | 2.50 | 24 | 40 | 8.0 | 2.00 | 1.6 | 0.070 | 0.250 | S3 |
LP-SM260 | 2.60 | 5.20 | 6 | 40 | 8.0 | 20.00 | 1.9 | 0.025 | 0.075 | S3 |
LP-SM300 | 3.00 | 6.00 | 6 | 40 | 8.0 | 35.00 | 1.9 | 0.015 | 0.048 | S3 |
LP-SM030C | 0.30 | 0.60 | 60 | 10 | 1.5 | 3.00 | 1.9 | 0.700 | 4.800 | S2 |
LP-SM050C | 0.50 | 1.00 | 60 | 10 | 2.5 | 4.00 | 1.9 | 0.350 | 1.400 | S2 |
LP-SM075C | 0.75 | 1.50 | 60 | 40 | 8.0 | 0.30 | 1.9 | 0.290 | 1.000 | S2 |
LP-SM110C | 1.10 | 2.20 | 33 | 40 | 8.0 | 0.50 | 1.9 | 0.100 | 0.480 | S2 |
LP-SM125C | 1.25 | 2.50 | 24 | 40 | 8.0 | 2.00 | 1.6 | 0.070 | 0.250 | S2 |
LP-SM130C | 1.30 | 2.60 | 33 | 40 | 8.0 | 4.00 | 2.1 | 0.080 | 0.280 | S2 |
LP-SM150C | 1.50 | 3.00 | 33 | 40 | 8.0 | 5.00 | 2.1 | 0.060 | 0.250 | S2 |
LP-SM185C | 1.85 | 3.70 | 33 | 40 | 8.0 | 5.00 | 2.1 | 0.045 | 0.165 | S2 |
LP-SM200C | 2.00 | 4.00 | 15 | 40 | 8.0 | 12.00 | 2.1 | 0.045 | 0.125 | S2 |
LP-SM250C | 2.50 | 5.00 | 15 | 40 | 8.0 | 25.00 | 1.9 | 0.025 | 0.085 | S2 |
LP-SM260C | 2.60 | 5.20 | 6 | 40 | 8.0 | 20.00 | 1.9 | 0.025 | 0.075 | S2 |
LP-SM300C | 3.00 | 6.00 | 6 | 40 | 8.0 | 35.00 | 1.9 | 0.015 | 0.048 | S2 |
LP-SM300C/24 | 3.00 | 6.00 | 24 | 40 | 8.0 | 35.00 | 1.9 | 0.015 | 0.048 | S2 |
LP-SM400C | 4.00 | 8.00 | 16 | 40 | 8.0 | 40.00 | 1.9 | 0.013 | 0.040 | S2 |
Size 8763mm/3425 mils
Part number | IH | IT | Vmax | Imax | Max. Time-to-trip | Pd typ | Rmin | R1max | Figures for | |
(A) | (A) | (V) | (A) | (A) | (S) | (W) | (Ω) | (Ω) | Dimension | |
LP-SM130 | 1.30 | 2.60 | 33 | 40 | 8.0 | 4.00 | 2.1 | 0.080 | 0.280 | S3 |
LP-SM150 | 1.50 | 3.00 | 33 | 40 | 8.0 | 5.00 | 2.1 | 0.060 | 0.250 | S3 |
LP-SM185 | 1.85 | 3.70 | 33 | 40 | 8.0 | 5.00 | 2.1 | 0.045 | 0.165 | S3 |
LP-SM200 | 2.00 | 4.00 | 15 | 40 | 8.0 | 12.00 | 2.1 | 0.045 | 0.125 | S3 |
LP-SM250 | 2.50 | 5.00 | 15 | 40 | 8.0 | 25.00 | 1.9 | 0.025 | 0.085 | S3 |
IH=Hold current: maximum current at which the device will not trip at 25℃ still air.
IT=Trip current: minimum current at which the device will always trip at 25℃ still air.
Vmax=Maximum voltage device can withstand without damage at rated current.
Imax=Maximum fault current device can withstand without damage at rated voltage.
Ttrip=Maximum time to trip at assigned current.
Pdtyp=Typical power dissipation: typical amount of power dissipated by the device when in state air environment.
Rmin=Minimum device resistance at 25℃ prior to tripping.
R1max=Maximum device resistance measured in the nontripped state 1 hour post reflow.
Marking System
Part Numbering System
Test Procedures And Requirements
Test | Test Conditions | Accept/Reject Criteria |
Resistance | In still air @ 25℃ | Rmin≤R≤Rmax |
Time to Trip | Specified current, Vmax, 25℃ | T≤maximum Time to Trip |
Hold Current | 30min, at IH | No trip |
Trip Cycle Life | Vmax, Imax, 100cycles | No arcing or burning |
Trip Endurance | Vmax, 24hours | No arcing or burning |
Size 7555mm/2920 mils
Part number | Tape& Reel Quantity | Tape spc code | Part Marking | Recommended Pad Layout Figures [mm(In.)] | Agency Recognition | |||||
Dimension A(Nom.) | Dimension B(Nom.) | Dimension C(Nom.) | ||||||||
LP-SM030 | 2000 | 2920A | 030 | 5.10 | (0.121) | 2.30 | (0.091) | 3.10 | (0.381) | UL,CSA,TUV |
LP-SM050 | 2000 | 2920A | 050 | 5.10 | (0.121) | 2.30 | (0.091) | 3.10 | (0.381) | UL,CSA,TUV |
LP-SM075 | 2000 | 2920A | 075 | 5.10 | (0.121) | 2.30 | (0.091) | 3.10 | (0.381) | UL,CSA,TUV |
LP-SM110 | 2000 | 2920A | 110 | 5.10 | (0.121) | 2.30 | (0.091) | 3.10 | (0.381) | UL,CSA,TUV |
LP-SM125 | 2000 | 2920A | 125 | 5.10 | (0.121) | 2.30 | (0.091) | 3.10 | (0.381) | UL,CSA,TUV |
LP-SM260 | 2000 | 2920A | 260 | 5.10 | (0.121) | 2.30 | (0.091) | 3.10 | (0.381) | UL,CSA,TUV |
LP-SM300 | 2000 | 2920A | 300 | 5.10 | (0.121) | 2.30 | (0.091) | 3.10 | (0.381) | TUV |
LP-SM030C | 2000 | 2920B | SM030 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM050C | 2000 | 2920B | SM050 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM075C | 2000 | 2920B | SM075 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM110C | 2000 | 2920B | SM110 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM125C | 2000 | 2920B | SM125 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM130C | 2000 | 2920B | SM130 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM150C | 2000 | 2920B | SM150 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM185C | 2000 | 2920B | SM185 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM200C | 2000 | 2920B | SM200 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM250C | 2000 | 2920B | SM250 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM260C | 2000 | 2920B | SM260 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | UL,CSA,TUV |
LP-SM300C | 2000 | 2920B | SM300 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | TUV |
LP-SM300C/24 | 2000 | 2920B | SM300 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | Pending |
LP-SM400C | 2000 | 2920B | SM400 | 4.60 | (0.211) | 2.00 | (0.081) | 5.30 | (0.341) | Pending |
Part number | Tape & Reel Quantity | Tape spc code | Part Marking | Recommended Pad Layout Figures[mm(In.)] | Agency Recognition | |||||
Dimension A(Nom.) | Dimension B(Nom.) | Dimension C(Nom.) | ||||||||
LP-SM130 | 1500 | 3425A | 130 | 6.10 | (0.181) | 2.30 | (0.091) | 4.60 | (0.421) | UL,CSA,TUV |
LP-SM150 | 1500 | 3425A | 150 | 6.10 | (0.181) | 2.30 | (0.091) | 4.60 | (0.421) | UL,CSA,TUV |
LP-SM185 | 1500 | 3425A | 185 | 6.10 | (0.181) | 2.30 | (0.091) | 4.60 | (0.421) | UL,CSA,TUV |
LP-SM200 | 1500 | 3425A | 200 | 6.10 | (0.181) | 2.30 | (0.091) | 4.60 | (0.421) | UL,CSA,TUV |
LP-SM250 | 1500 | 3425A | 250 | 6.10 | (0.181) | 2.30 | (0.091) | 4.60 | (0.421) | UL,CSA,TUV |
* Devices can be cleaned using standard industry methods and solvents.
Notes:
If reflow temperatures exceed the recommended profile,
devices may not meet the performance requirements.
Tape Specification And Reel Dimensions
Tape spc code | W | P0 | P1 | P2 | A | bB B | D | F | E | T | K |
2920(A) | 16.0±0.10 | 4.00±0.10 | 8.00±0.10 | 2.00±0.10 | 5.60±0.10 | 8.10±0.10 | 1.55±0.05 | 7.50±0.10 | 1.75±0.10 | 0.30±0.05 | 3.40±0.10 |
2920(B) | 16.0±0.10 | 4.00±0.10 | 8.00±0.10 | 2.00±0.10 | 5.60±0.10 | 8.10±0.10 | 1.55±0.05 | 7.50±0.10 | 1.75±0.10 | 0.30±0.05 | 1.50±0.10 |
3425(A) | 16.15±0.15 | 4.00±0.10 | 12.0±0.10 | 2.00±0.10 | 6.90±0.10 | 9.40±0.10 | 1.55±0.05 | 7.50±0.10 | 1.75±0.10 | 0.30±0.05 | 3.40±0.10 |
Tape spc code | A | N | W1 | W2 |
2920(A) | 330+0/-1.5 | 100+1/-0 | 16.4+1/-0 | 24.2+1/-0 |
2920(B) | 330+0/-1.5 | 100+1/-0 | 16.4+1/-0 | 24.2+1/-0 |
3425(A) | 330+0/-1.5 | 100+1/-0 | 16.4+1/-0 | 24.2+1/-0 |
Storage
The maximum ambient temperature shall not exceed 40℃. Storage temperatures higher than 40℃ could result in the deformation of packaging materials. The maximum relative humidity recommended for storage is 70%. High humidity with high temperature can accelerate the oxidation of the solder plating on the termination and reduce the solderability of the components. Sealed plastic bags with desiccant shall be used to reduce the oxidation of the termination and shall only be opened prior to use. The products shall not be stored in areas where harmful gases containing sulfur or chlorine are present.
Warning:
PPTC devices are intended for protection against occasional over-current or over-temperature fault conditions, and should not be used when repeated fault conditions are anticipated. Operation beyond maximum ratings or improper use may result in device damage and possible electrical arcing and flame.
Notes:
The specification is intended to present application, product and technical data toassist the user in selecting PPTC circuit pro
Resource:http://www.wayonpptc.com/resettable-fuse.html